[ Каскадный ] · Стандартный · Линейный+ звук из Bly-ray, чем и как?

[CAMELOT]

собственно стало интересно как кроме Eac3to можно вытянуть все звуковые файлы из блю,если есть желающие могут подробно это написать
можно так же описать правильное пользование Eac3to,заранее спасибо

[shurikkein]

По поводу использования eac3to:

краткое описание с doom9

eac3to v2.46, freeware by madshi.net

- can show information about audio, video and VOB/EVO/(M2)TS files
- can decode and encode various audio formats
- can remove dialog normalization from AC3, E-AC3, DTS and TrueHD tracks
- can extract AC3 stream from Blu-Ray TrueHD/AC3 tracks
- can extract TrueHD stream from Blu-Ray TrueHD/AC3 tracks
- can extract DTS core from DTS-HD tracks
- can remove DTS zero padding and repair outdated DTS-ES headers
- can apply positive or negative audio delays
- can reduce bitdepth of decoded audio data by using TPDF dithering
- can resample decoded audio data (using "r8brain")
- can apply/reverse PAL speedup on decoded audio data (using "r8brain")
- can demux all video and audio tracks of an EVO/VOB/(M2)TS source file
- can join/rebuild multiple EVO/VOB files
- can remux the video track of a EVO/VOB/(M2)TS source to Matroska

eac3to sourcefile[+sourcefile2] [trackno:] [destfile|stdout] [-options]

Examples:
eac3to source.pcm destination.flac
eac3to source.thd destination.flac destination.ac3
eac3to source.evo 1: chapters.txt 2: video.mkv 3: audio.flac 5: subtitle.sup
eac3to feature_1.evo+feature_2.evo movie.mkv
eac3to 00001.m2ts movie.mkv

Options:
-448 use "192", "448" or "640" kbit/s for AC3 encoding
-768 use "768" or "1536" kbit/s for DTS encoding
-core extract the DTS core of a DTS-HD track
+/-100ms apply a positive or negative delay
-0,1,2,3,4,5 remap the channels to the specified order
-blu-ray remaps channels from Blu-Ray LPCM order to normal order
-extensible use "extensible" header for the destination WAV file.
-down6 downmix 7 or 8 channels to 6 channels
-down2 downmix multi channel audio to stereo (Dolby Pro Logic II)
-mixlfe mix LFE in (when doing stereo downmixing, see "down2")
-down16 downconvert decoded audio data to 14..23 bit
-slowdown reverse PAL speedup (25.000 -> 24.000/1.001 fps)
-speedup apply PAL speedup (24.000/1.001 -> 25.000 fps)
-resampleTo48000 resample audio to "44100", "48000" or "96000" Hz
-quality=4 slowdown/speedup/resampling quality (0 = low; 4 = very high)
-8 PCM file has "1".."8" channels
-16 PCM file is "16" or "24" bit
-little PCM file is "little" or "big" endian
-96000 PCM file is "44100", "48000", "96000" or "192000" Hz
-override forcefully overrides PCM auto detection with manual values
-sonic/nero/libav force the use of a specific decoder (not recommended)
-keepDialnorm disables dialog normalization removal (not recommended)
-demux EVO/VOB: demuxes 1st video track and all audio tracks
-stripPulldown strips the pulldown when demuxing VC-1 tracks
-keepPulldown disable removing of pulldown for MPEG2 tracks
-skip2 skips the first 1..99 VC-1 sequence headers
-seekToIFrames make all h264/AVC "I" frames seekable
-24p/30p/60i force the use of the specified framerate for h264 muxing
-check checks if the source EVO/(M2)TS file is clean.
-test checks if the external filters are installed & working

Supported source formats:
(1) RAW, (L)PCM
(2) WAV (PCM + DTS only)
(3) AC3, E-AC3
(4) DTS, DTS-ES, DTS-96/24, DTS-HD Hi-Res, DTS-HD Master Audio
(5) MP2 audio
(6) MLP, TrueHD, TrueHD/AC3
(7) FLAC
(8) EVO/VOB/(M2)TS

Decoded audio data can be stored as / encoded to:
(1) RAW, (L)PCM
(2) WAV (PCM only)
(3) WAVs (multiple mono WAV files, PCM only)
(4) AC3
(5) DTS
(6) FLAC

For best AC3 and E-AC3 decoding you need:
(1) Nero 7 (Nero 8 won't work!)
(2) Nero HD-DVD / Blu-Ray plugin

For best DTS decoding you need:
(1) "Sonic Cinemaster Audio Decoder 4.3" DirectShow filter

For DTS encoding you need:
(1) SurCode DVD DTS - version 1.0.21 or newer

For video muxing you need:
(1) Haali Matroska Muxer

в принципе, тут и переводить нечего