Nero 6606 как и Nero 63117 дает ошибку "could not perform disc at once"
Не могу также использовать опцию "track at once" так как окно с опциями
в программе затемнено на "disc at once" и смена опции не возможна.
Кто может помогите
Спасибо...
Full Version: Запись DvD c данными на Nero 6
При записи DVD с данными (фильмы в формате avi или программы) программа
Nero 6606 как и Nero 63117 дает ошибку "could not perform disc at once"
Не могу также использовать опцию "track at once" так как окно с опциями
в программе затемнено на "disc at once" и смена опции не возможна.
Кто может помогите
Спасибо...
Nero 6606 как и Nero 63117 дает ошибку "could not perform disc at once"
Не могу также использовать опцию "track at once" так как окно с опциями
в программе затемнено на "disc at once" и смена опции не возможна.
Кто может помогите
Спасибо...
Попробую предположить что ты немного превысил размер, который можно вместить на ДВД. ДВД писалки не поддерживают overburn, поэтому превышение даже на несколько килобайт не даст программе закрыть сессию и диск. Учти еще что размер DVD+R на 3-4 мегабайта меньше чем DVD-R.
Если же нет и диск не заполнен до упора - то возможна проблема с диском или с совместимостью Nero с твоей писалкой. Вышла версия 6.6.0.8, может быть там добавлена поддержка твоего рекордера.
Если же нет и диск не заполнен до упора - то возможна проблема с диском или с совместимостью Nero с твоей писалкой. Вышла версия 6.6.0.8, может быть там добавлена поддержка твоего рекордера.
Спасибо за ответ. Но проблема не в объеме данных...
На диске остается место на 300-400 мгб.
На диске остается место на 300-400 мгб.
Производители DVD-R приводов и дисков указывают емкость носителей так же, как и производители жестких дисков - в миллионах байт. Программы же показывают размер файла в тысячах мегабайт. Поэтому файл, например, в 4.6 GBytes имеет объем в 1024х1024х4600=4 823 449 600 байт, что, явно, больше 4.7 миллиона байт.
Прога дает следующий лог:
SuperRomu
-=[SuperRomu]=-
1A23-0009-5030-2314-0571-0701
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 16.21.30
Nero Version: 6.6.0.6
Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.6
Adapter driver: <xmasscsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : ARTEC WRR-52X atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 3 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 3 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4081 I: CDRom0
ARTEC WRR-52X J: CDRom1
AXV CD/DVD-ROM E: CDRom4
NERO IMAGEDRIVE2 O: CDRom2
NERO IMAGEDRIVE2 F: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 105MB (108020kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.2.2005
ISO compilation
12.41.40 #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12.41.40 #2 Text 0 File Reader.cpp, Line 127
Reader running
12.41.40 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4081B running
12.41.40 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
12.41.40 #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media
12.41.40 #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2037279 (452:43.54, 3979MB)
12.41.40 #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)
12.41.40 #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
12.41.40 #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12.41.40 #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2037280 (2037280) = #2037280/452:43.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2037280 blocks [HL-DT-ST DVDRAM GSA-4081B]
--------------------------------------------------------------
12.41.40 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4172349440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2037280 | lead-out | 1 | 0x41 | 0x00
12.41.41 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12.41.41 #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.
12.41.41 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12.41.41 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)
12.41.41 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12.41.41 #17 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12.41.41 #18 Text 0 File DVDPlusRW.cpp, Line 615
Start write address at LBA 0
DVD high compatibility mode: Yes
12.42.24 #19 SCSI -1135 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03370000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x03 0x0E 0x0C 0x00
12.42.24 #20 CDR -1135 File Writer.cpp, Line 311
Write error
12.42.24 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12.42.24 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12.42.24 #23 SCSI -1135 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x03 0x0E 0x0C 0x00
12.42.24 #24 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
12.42.24 #25 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
12.42.24 #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11.080 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 7.59.42 (Adapter driver for rec)
File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504 bytes, created 20/12/2003 20.03.42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Для меня это темный лес но может кто может помочь...
Спасибо
SuperRomu
-=[SuperRomu]=-
1A23-0009-5030-2314-0571-0701
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 16.21.30
Nero Version: 6.6.0.6
Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.6
Adapter driver: <xmasscsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : ARTEC WRR-52X atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 3 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 3 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4081 I: CDRom0
ARTEC WRR-52X J: CDRom1
AXV CD/DVD-ROM E: CDRom4
NERO IMAGEDRIVE2 O: CDRom2
NERO IMAGEDRIVE2 F: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 105MB (108020kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.2.2005
ISO compilation
12.41.40 #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12.41.40 #2 Text 0 File Reader.cpp, Line 127
Reader running
12.41.40 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4081B running
12.41.40 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
12.41.40 #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media
12.41.40 #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2037279 (452:43.54, 3979MB)
12.41.40 #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)
12.41.40 #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
12.41.40 #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12.41.40 #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2037280 (2037280) = #2037280/452:43.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2037280 blocks [HL-DT-ST DVDRAM GSA-4081B]
--------------------------------------------------------------
12.41.40 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4172349440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2037280 | lead-out | 1 | 0x41 | 0x00
12.41.41 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12.41.41 #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.
12.41.41 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12.41.41 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)
12.41.41 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12.41.41 #17 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12.41.41 #18 Text 0 File DVDPlusRW.cpp, Line 615
Start write address at LBA 0
DVD high compatibility mode: Yes
12.42.24 #19 SCSI -1135 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03370000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x03 0x0E 0x0C 0x00
12.42.24 #20 CDR -1135 File Writer.cpp, Line 311
Write error
12.42.24 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12.42.24 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12.42.24 #23 SCSI -1135 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x03 0x0E 0x0C 0x00
12.42.24 #24 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
12.42.24 #25 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
12.42.24 #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11.080 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 7.59.42 (Adapter driver for rec)
File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504 bytes, created 20/12/2003 20.03.42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Для меня это темный лес но может кто может помочь...
Спасибо
Вопрос №1 - диск, который был вставлен, дествительно поддерживает запись х8 ? Потому как судя по логу при записи проверка максимальной скорости записи была отключена. А писать желательно на ступеньку ниже написанного на диске - для надежности.
Вопрос №2 - какое количество файлов на диске? Возможно для большого количества файлов придется выбрать UDF файловую систему. Это говорят менее надежно, хотя я лично ни разу не сталкивался с проблемами при применении UDF.
Вопрос №2 - какое количество файлов на диске? Возможно для большого количества файлов придется выбрать UDF файловую систему. Это говорят менее надежно, хотя я лично ни разу не сталкивался с проблемами при применении UDF.
Рекордер LG GSA-4081B (HL-DT-ST DVDRAM GSA-4081B) имеет некоторые проблемы по совместимости с болванками. Например болванки TDK -R 4x (TTG01), Memorex -R 8x (CMC MAG.AE1), Memorex +R 8x он писать вообще отказывается. Возможно твоя болванка Tayo Yuden относится к этой категории. Попробуй сменить болванку. Но сначала попробуй выбрать Nero Image Recorder и записать на него. И, конечно, не пиши на скорости 8х, при очень небольшом выигрыше во времени значительно ухудшается качество записи. 4х - оптимальный вариант.
А окошко "disc-at-once" при записи DVD отключено всегда.
PS. Ещё желательно обновить прошивку привода (firmware), новую версию всегда можно найти на сайте производителя.
А окошко "disc-at-once" при записи DVD отключено всегда.
PS. Ещё желательно обновить прошивку привода (firmware), новую версию всегда можно найти на сайте производителя.
Спасибо за ответы .
Обновил прокладку но безрезультатно...
.
Народ говорит что для DVDRAM GSA-4081B нет драйвера для записи
DVD-R c данными при оперативной системе WIN XP . Новая прокладка
А 104 такой возможности не дала...
Может кто в курсе....??
Спасибо
.Обновил прокладку но безрезультатно...
.Народ говорит что для DVDRAM GSA-4081B нет драйвера для записи
DVD-R c данными при оперативной системе WIN XP . Новая прокладка
А 104 такой возможности не дала...
Может кто в курсе....??
Спасибо
QUOTE(rederric @ там)
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0 DMA: Off
включи режим UDMA в девайс-менеджере, без этого режима твой привод вряд ли захочет что-то писать на нормальной скорости ДВД.
для винчестера режим UDMA включен, а у привода выключен.
как уже сказал lalex,
Device Manager -> IDE ATA/ATAPI controllers -> Primary (а потом Secondary) IDE Controller -> Advanced -> DMA if Avavailable для Device 0 и Device 1.
Без этого у тебя комп будет тормозить при записи, и диск никогда не запишется нормально.
DMA вообще всегда должен быть включен если он поддерживается
Taio Yuden, кстати, нормальные болванки, их можно писать на той скорости которая на них указана и проблем быть не должно.
Device Manager -> IDE ATA/ATAPI controllers -> Primary (а потом Secondary) IDE Controller -> Advanced -> DMA if Avavailable для Device 0 и Device 1.
Без этого у тебя комп будет тормозить при записи, и диск никогда не запишется нормально.
DMA вообще всегда должен быть включен если он поддерживается
Taio Yuden, кстати, нормальные болванки, их можно писать на той скорости которая на них указана и проблем быть не должно.
Lalex, Leshii Спасибо за совет.
Поменял установки во втором контроллере ( в первом все было ОК) однако без результата......
Вот последний лог:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 16.21.30
Nero Version: 6.6.0.6
Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 1 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.6
Adapter driver: <xmasscsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ARTEC WRR-52X atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4081 G: CDRom0
ARTEC WRR-52X J: CDRom1
AXV CD/DVD-ROM E: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 137MB (140416kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.3.2005
ISO compilation
10.49.08 #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10.49.08 #2 Text 0 File Reader.cpp, Line 127
Reader running
10.49.08 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4081B running
10.49.08 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
10.49.08 #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media
10.49.08 #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2037279 (452:43.54, 3979MB)
10.49.08 #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)
10.49.08 #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R02, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3
10.49.08 #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10.49.08 #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2037280 (2037280) = #2037280/452:43.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2037280 blocks [HL-DT-ST DVDRAM GSA-4081B]
--------------------------------------------------------------
10.49.28 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4172349440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2037280 | lead-out | 1 | 0x41 | 0x00
10.49.29 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10.49.29 #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.
10.49.29 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10.49.29 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)
10.49.29 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10.49.29 #17 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R02
Product revision number: 3
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 43 4F 48 - 4A 50 4E 52 30 32 03 38 ...RICOHJPNR02.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
10.49.30 #18 Text 0 File DVDPlusRW.cpp, Line 615
Start write address at LBA 0
DVD high compatibility mode: Yes
10.49.49 #19 SCSI -1135 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03E10000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x03 0x0E 0x0C 0x00
10.49.49 #20 CDR -1135 File Writer.cpp, Line 311
Write error
10.49.49 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10.49.49 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10.49.50 #23 SCSI -1135 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x03 0x0E 0x0C 0x00
10.49.50 #24 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
10.49.58 #25 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
10.49.58 #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11.080 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 7.59.42 (Adapter driver for rec)
File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504 bytes, created 20/12/2003 20.03.42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Спасибо...
Поменял установки во втором контроллере ( в первом все было ОК) однако без результата......
Вот последний лог:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 16.21.30
Nero Version: 6.6.0.6
Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 1 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.6
Adapter driver: <xmasscsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ARTEC WRR-52X atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4081 G: CDRom0
ARTEC WRR-52X J: CDRom1
AXV CD/DVD-ROM E: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 137MB (140416kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.3.2005
ISO compilation
10.49.08 #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10.49.08 #2 Text 0 File Reader.cpp, Line 127
Reader running
10.49.08 #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4081B running
10.49.08 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
10.49.08 #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media
10.49.08 #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2037279 (452:43.54, 3979MB)
10.49.08 #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)
10.49.08 #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R02, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3
10.49.08 #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10.49.08 #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2037280 (2037280) = #2037280/452:43.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2037280 blocks [HL-DT-ST DVDRAM GSA-4081B]
--------------------------------------------------------------
10.49.28 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4172349440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2037280 | lead-out | 1 | 0x41 | 0x00
10.49.29 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10.49.29 #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.
10.49.29 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10.49.29 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)
10.49.29 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10.49.29 #17 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R02
Product revision number: 3
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 43 4F 48 - 4A 50 4E 52 30 32 03 38 ...RICOHJPNR02.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
10.49.30 #18 Text 0 File DVDPlusRW.cpp, Line 615
Start write address at LBA 0
DVD high compatibility mode: Yes
10.49.49 #19 SCSI -1135 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03E10000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x03 0x0E 0x0C 0x00
10.49.49 #20 CDR -1135 File Writer.cpp, Line 311
Write error
10.49.49 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10.49.49 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10.49.50 #23 SCSI -1135 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x03 0x0E 0x0C 0x00
10.49.50 #24 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
10.49.58 #25 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
10.49.58 #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11.080 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 7.59.42 (Adapter driver for rec)
File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504 bytes, created 20/12/2003 20.03.42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Спасибо...
Cпасибо всем за совет и помощь. Нашел причину
Проблема была с резаком. Сейчас все О.К.
Проблема была с резаком. Сейчас все О.К.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.