[ Каскадный ] · Стандартный · Линейный+ Проблема с записью в DVD(UDF)

[Arno 2]

Всем привет.

У меня возникла следующая проблема.

После переустановки Windows XP Pro. не могу больше воспроизвести на домашнем плеере фильмы записанные в через НЕРО в формате DVD-ROM(UDF), примерно через час фильм обрывается. Фильмы записанные до переустановки системы в том же формате проигрываются без проблем, значит плеер не виновен. Чего то я упустил и не пойму чего. Если кто то из вас с этим сталкивался и победил или же кто знает как это поправить, буду очень признателен. Зарание благодарен за любую подсказку.

[Arno 2]

Комп от DELL и стояла Неро 7, я потом только апдэйт делал.


Вот лог Неро, но незнаю тот ли. Как раз опять пробую запись.


PC
PC
1A23-0609-9130-2227-9634-6883
1A40-0809-4030-2236-8018-9644
1A41-0609-4130-2312-8317-4605
1A42-0009-4130-2413-2086-2091
1A43-0809-4030-2415-9529-6580
1A44-0009-9030-2363-2995-7563
1A46-0009-4130-2396-1981-8735
1A47-0009-4030-2358-9735-2974
1A48-0609-9030-2261-9125-0382
1A49-0809-9030-2251-9529-6587
1A4A-0809-9030-2225-8721-8043

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32

NT-SPTI used
Nero Version: 6.6.1.6
Internal Version: 6, 6, 1, 6b

Recorder: <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 0 - 6.6.1.6
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JS2227L AIU543F >Version: 2.0B - HA 1 TA 1 - 6.6.1.6
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JB-00REA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR 6L060J3 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : JS2227L AIU543F 2.0B a4byke70 Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4160B D: CDRom0
JS2227L AIU543F F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1279MB (1310192kB)
Free physical memory: 614MB (629724kB)
Memory in use : 51
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.2.2007
UDF Zusammenstellung
23:53:40 #1 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

23:53:40 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

23:53:40 #3 Text 0 File Reader.cpp, Line 124
Reader running

23:53:40 #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4160B running

23:53:40 #5 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

23:53:44 #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1052079 (233:47.54, 2054MB)

23:53:44 #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD DVD)

23:53:44 #8 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD+RW
Disc Manufacturer ID: DAXON, Media Type ID: D42, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

23:53:44 #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD-RAM; DVD+R DL.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD-RAM; DVD+R DL.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD-RAM; DVD+R DL.)

23:53:44 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1052080 (1052080) = #1052080/233:47.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1052080 blocks [HL-DT-ST DVDRAM GSA-4160B]
--------------------------------------------------------------

23:53:44 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2154659840, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1052080 | lead-out | 1 | 0x41 | 0x00

23:53:44 #12 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

23:53:44 #13 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

23:53:44 #14 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

23:53:44 #15 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

23:53:44 #16 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

23:53:44 #17 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5.540 KB/s)

23:53:44 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

23:53:44 #19 Text 0 File Cdrdrv.cpp, Line 8648
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: DAXON...
Media type ID: D42
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 44 41 58 4F 4E - 00 00 00 44 34 32 00 39 ...DAXON...D42.9
23 00 9C 7D 5C 02 28 00 - B0 74 70 02 28 00 96 80 #..}\.(..tp.(...
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............

23:53:44 #20 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

00:00:33 #21 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4160B> start writing Lead-Out at LBA 1052080 (100DB0h), lenght 0 blocks

00:00:33 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

00:00:35 #23 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 4x (5.540 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 30.01.2007 06:03:34 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
PC
PC
1A23-0609-9130-2227-9634-6883
1A40-0809-4030-2236-8018-9644
1A41-0609-4130-2312-8317-4605
1A42-0009-4130-2413-2086-2091
1A43-0809-4030-2415-9529-6580
1A44-0009-9030-2363-2995-7563
1A46-0009-4130-2396-1981-8735
1A47-0009-4030-2358-9735-2974
1A48-0609-9030-2261-9125-0382
1A49-0809-9030-2251-9529-6587
1A4A-0809-9030-2225-8721-8043

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32

NT-SPTI used
Nero Version: 6.6.1.6
Internal Version: 6, 6, 1, 6b
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 0 - 6.6.1.6
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JS2227L AIU543F >Version: 2.0B - HA 1 TA 1 - 6.6.1.6
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JB-00REA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR 6L060J3 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : JS2227L AIU543F 2.0B am7i9s3g Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4160B D: CDRom0
JS2227L AIU543F F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1279MB (1310192kB)
Free physical memory: 662MB (678232kB)
Memory in use : 48
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.2.2007
UDF Zusammenstellung
11:19:08 #1 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

11:19:08 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

11:19:08 #3 Text 0 File Reader.cpp, Line 124
Reader running

11:19:08 #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4160B running

11:19:08 #5 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

11:19:11 #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1052079 (233:47.54, 2054MB)

11:19:11 #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD DVD)

11:19:11 #8 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD+RW
Disc Manufacturer ID: DAXON, Media Type ID: D42, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

11:19:11 #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD-RAM; DVD+R DL.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD-RAM; DVD+R DL.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD-RAM; DVD+R DL.)

11:19:11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1052080 (1052080) = #1052080/233:47.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1052080 blocks [HL-DT-ST DVDRAM GSA-4160B]
--------------------------------------------------------------

11:19:11 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2154659840, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1052080 | lead-out | 1 | 0x41 | 0x00

11:19:12 #12 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:19:12 #13 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:19:12 #14 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

11:19:12 #15 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

11:19:12 #16 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

11:19:12 #17 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5.540 KB/s)

11:19:12 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:19:12 #19 Text 0 File Cdrdrv.cpp, Line 8648
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: DAXON...
Media type ID: D42
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 44 41 58 4F 4E - 00 00 00 44 34 32 00 39 ...DAXON...D42.9
23 00 9C 7D 5C 02 28 00 - B0 74 70 02 28 00 96 80 #..}\.(..tp.(...
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............

11:19:12 #20 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

11:25:53 #21 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4160B> start writing Lead-Out at LBA 1052080 (100DB0h), lenght 0 blocks

11:25:53 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:25:56 #23 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 4x (5.540 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 30.01.2007 06:03:34 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
PC
PC
1A23-0609-9130-2227-9634-6883
1A40-0809-4030-2236-8018-9644
1A41-0609-4130-2312-8317-4605
1A42-0009-4130-2413-2086-2091
1A43-0809-4030-2415-9529-6580
1A44-0009-9030-2363-2995-7563
1A46-0009-4130-2396-1981-8735
1A47-0009-4030-2358-9735-2974
1A48-0609-9030-2261-9125-0382
1A49-0809-9030-2251-9529-6587
1A4A-0809-9030-2225-8721-8043

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32

NT-SPTI used
Nero Version: 6.6.1.6
Internal Version: 6, 6, 1, 6b

Recorder: <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 0 - 6.6.1.6
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JS2227L AIU543F >Version: 2.0B - HA 1 TA 1 - 6.6.1.6
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JB-00REA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR 6L060J3 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : JS2227L AIU543F 2.0B azlxdbgn Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4160B D: CDRom0
JS2227L AIU543F F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1279MB (1310192kB)
Free physical memory: 683MB (700372kB)
Memory in use : 46
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.2.2007
UDF Zusammenstellung
13:32:19 #1 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

13:32:19 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

13:32:19 #3 Text 0 File Reader.cpp, Line 124
Reader running

13:32:19 #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4160B running

13:32:19 #5 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

13:32:23 #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1052079 (233:47.54, 2054MB)

13:32:23 #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD DVD)

13:32:23 #8 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD+RW
Disc Manufacturer ID: DAXON, Media Type ID: D42, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1

13:32:23 #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD-RAM; DVD+R DL.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD-RAM; DVD+R DL.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW; DVD-RAM; DVD+R DL.)

13:32:23 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1052080 (1052080) = #1052080/233:47.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1052080 blocks [HL-DT-ST DVDRAM GSA-4160B]
--------------------------------------------------------------

13:32:23 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2154659840, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1052080 | lead-out | 1 | 0x41 | 0x00

13:32:24 #12 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

13:32:24 #13 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

13:32:24 #14 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

13:32:24 #15 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

13:32:24 #16 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

13:32:24 #17 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5.540 KB/s)

13:32:24 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:32:24 #19 Text 0 File Cdrdrv.cpp, Line 8648
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: DAXON...
Media type ID: D42
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 44 41 58 4F 4E - 00 00 00 44 34 32 00 39 ...DAXON...D42.9
23 00 9C 7D 5C 02 28 00 - B0 74 70 02 28 00 96 80 #..}\.(..tp.(...
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............

13:32:24 #20 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

13:39:09 #21 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4160B> start writing Lead-Out at LBA 1052080 (100DB0h), lenght 0 blocks

13:39:09 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

13:39:10 #23 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 4x (5.540 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 30.01.2007 06:03:34 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 21:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======